top of page

Incinerator

   Waste incineration refers to the process of burning solid waste at high temperatures in a controlled environment, which are called incinerators. Incinerators are furnaces designed to handle waste materials in the form of solid, liquid and sludge. This process significantly reduces the volume of the waste (by up to 95%) and also reduces its mass (by 80-85%).

​

   It's a common method of waste treatment used for various solid waste streams including municipal solid waste (household trash) bio-medical waste and industrial hazardous wastes.

 

Working Principle of Traditional Incinerator

​

 

 

 

 

 

       A primary combustion chamber for burning solid waste or sludge oil is included in the design of the incinerator. In contrast, a secondary combustion chamber is included for burning out any unburned exhaust gases. A primary burner is installed in the primary combustion chamber. This burner receives diesel oil/pressurized natural gas (PNG) to ignite it initially. After that, the primary burner receives the solid waste or sludge oil until it ignites in the primary combustion chamber. The primary burner receives atomizing air via forced draft to facilitate effective and complete combustion in the primary chamber. On the solid waste return line, there is a pressure-regulating valve that can be used to control the amount of waste that enters the combustion chamber. The solid waste will dry out and begin burning when the primary burner’s heat is applied, and the sludge oil may also catch fire. The temperature here is generally in the range of 1000 to 1200 Degree Celsius. The gases from the primary combustion chamber will burn out in the secondary combustion chamber. The secondary combustion chamber will also have a secondary burner inside it which will help in burning out the remnant unburned exhaust fumes from the primary chamber.

     The residence time of these exhaust gases in both the chambers combined should be at least 2+ seconds to ensure complete combustion and for neutralizing the dioxins and furans present in the exhaust fumes. The primary and secondary combustion chambers are closed vessel having a wall of ceramic heavy-duty refractory brick liners. Solid waste is fed into the incinerator through the feeding door in cases of solid waste or garbage. The primary burner cannot be lit if this door is open, but the rest of the combustion process continues as usual.

      The flue gas (exhaust gas) from the secondary combustion chamber contains pollutants and needs careful treatment. A series of equipment’s are used for this purpose including scrubbers, filters, absorber and electrostatic precipitators. These systems aim to remove particulates, acid gases, and other harmful toxins from the flue gas before it's released into the atmosphere via the chimney.

        The incineration process creates ash residue, which can include concentrated heavy metals and other contaminants. This ash needs to be carefully collected and disposed of in specially designed landfills.

Pic 1.jpg

Biomass fired Incinerator

Diagram 0.png

      There is need to have a unique innovative system which will be used for the incineration of Hazardous Waste generated from the industrial process as well as from Hospital setups.

       Biomass fired Incinerator is a unique and patented design which uses agro-waste derived biomass briquettes/pellets as primary fuel for waste incineration into a single system. It combines and utilises the hot flue gases from both the Biomass Fuel as well as the waste in a Dual Combustion Chamber design called Muffle Furnace. The muffle furnace also consists of a unique 4 pass system which helps in maintaining the exhaust flue gases at 900°C+ for a period of >2 seconds to neutralize the dioxins and furans from the flue gases. After these hot flue gases are passed through the muffle furnace, they are further treated via several air pollution control systems before releasing them to the environment via the Chimney. This process ensures that no harmful gases are being ejected into the environment at the end of the process.

       The overall process operates between temperatures from 900 - 1200 °C while producing a lot of thermal energy in the process. If utilized, this can be an excellent source of renewable energy that can generate steam/hot water as well as electricity at the same time while working as an external combustion engine. Producing energy while reducing pollution with successful waste handling is one of the world’s most demanding task to achieve. The Biomass fired Incinerator system can achieve all these goals. On one hand, it can work as an efficient incinerator which can provide a successful waste treatment system and on the other hand, it can provide pollution-free hot water, steam, and electricity as energy sources to fulfil your energy requirement.

Fossil Fuel Incinerators

Carbon Emissions: 1.5 kg CO2 per kWh

Energy Density: High, but non-renewable

Operating Cost: High due to extraction

Biomass Incinerators

Carbon Emissions: 0.02 kg CO2 per kWh

Energy Density: Moderate, renewable

Operating Cost: Low due to local sourcing

bottom of page